Makita 6407 3/8-Inch Variable Speed Reversible Drill Review

Makita 6407 3/8-Inch Variable Speed Reversible Drill

Makita has a great reputation for producing quality reliable power tools and consumer comments from across the net indicate that this drill holds up to that. The Makita 6407 is meant for light duty applications around the house. At 3.1 pounds (1.4 kg), this little corded drill is lightweight enough that a woman can handle it. In this review you will find information regarding the main features of the simple, basic drill, along with some pros and cons.

For around $70, it is definitely not the most affordable corded drill in the market. There are tons of corded units that sell for under $30. But when it comes to power tools, it is wise to buy the best unit that you can afford. It will be cheaper in the long run. Just remember the old saying, ” you get what you pay for”. Makita is a good brand. A lot of people swear by Makita. For the average household use, $70 is an appropriate amount to pay for a well built corded drill. You can expect this one to last many years.

The Makita 6407 is powered by a 4.9 AMP motor. The power cord is 8.2 ft length which is long enough to do most jobs without an extension cord. This low amperage model will not perform like a heavy duty drill. If you are going to be drilling rock-hard materials, it is not the right product for you. However, user reviews indicate that it is a powerful drill for basic household usage. Higher amp ratings normally mean more power. But this is not always the case. Highly effecient tools do not require more current to perform the same job as lower grade tools.

The single-speed drill runs at 2,500 rpm under no load condition. The manual says that this consumer-type drill is equipped with variable speed capability which means speed can be controlled with simple trigger pressure. For continuous operation, you can push in the lock button. This allows for ease of operator comfort during extended use. This pistol-grip drill also comes equipped with a reversing switch that enables you to change the direction of rotation.

Capacity in wood is 25 mm (1”) which is considered standard for corded drills. The maximum diameter this power drill can produce in steel is 10 mm (3/8”). The chuck is keyed so you must use a key to unlock the chuck in order to install or remove the drill bit. But, though keyless chuck is easier to use, keyed chuck enables you to tighten up on small bits. It helps when drilling metal. However, if you prefer the keyless chuck system, the Makita 6408 may be for you. Click here to visit Amazon for further info.

Basically, there are four types of bearings used in power tool: ball, roller, needle and sleeve. The Makita 6407 uses all ball bearing construction that is considered the most desirable type of bearing. Full ball bearing construction reduces friction to the minimum. Drills which are fitted with this type of bearing can be operated continuously over long periods of time. Consumer tools normally use sleeve bearing. This construction has no rolling element.

When it comes to design, the drill measures 10 9/32 inches in length. Large trigger switch and large recessed lock-on button allow for comfortable operation. The advertised db level is 79dB that is considered low for a power drill.

User reviews of the Makita 6407 3/8-Inch Variable Speed Reversible Drill are impressive. As of this writing, the corded drill scores 4.6 stars out of 5 on Amazon. It is a simple drill that does not come with bells and whistles. Like most corded drills, it does not have a clutch. No case comes in the box, just the drill and a chuck to tighten the bit. Other than some minor considerations this tool is highly recommended.

According to many reviewers, this drill packs a lot of power for only 4.9 amps. Some have reported that sometimes it is too powerful. If you want a drill for precise projects, this probably is not a good fit for you. Some customers have expressed their concerns that the drill tends to keep spinning for quite a while after the switch trigger is released. This is not really an issue when drilling holes but it is when driving screws. But when you need consistent power and speed, it will come in handy.

Users have found that the drill feels very solid. It should last a long time. The lightweight design has also made a positive impression upon the reviewers. It is light enough to use one-handed. The larger trigger is another characteristic of this drilling machine that have impressed the reviewers. It lets you use two fingers instead of one. Overall, the customers have been pleased with its sturdy feel and smooth operation.

The Makita 6407 3/8 drill is not designed to handle all situations. But if what you need is a simple, well made corded drill that offers plenty of power, then this portable electric power tool is worth considering. Some people bought it as a replacement for the older version that they had used for years. They seem happy with their purchasing decision.

You can leave a response, or trackback from your own site.
Powered by WordPress and WordPress Themes, thanks to Live Jasmin